Use hair dryer to blow hot air Whip the 'led area' of the monitor for ten minutes
Blow monitor cable socket Power cord socket Chassis Blow off the electric hair // The temperature is quite high, and the graphics card interface must be blown
A new line needs to be replaced
The socket needs to be connected to the wire. The metal hole is polished, and every electric shock inside must be energized.
Hairdryer
Blow button module
Mainly dry completely
Smoking with your mouth to light a cigarette. Carbon has the ability to absorb water.
The wire screen is 100% unsharpened sockets
Recommended to disassemble it, it is to make up and try it out again
If the blowing is done, how long after this happens again?
That wasn't completely blown dry
Those who enter instant noodle soup need to wash the circuit board and interface, because I washed the mechanical keyboard and then completely dried it, which solved the problem of abnormal keys.
Soap-washing circuit board requires a hard brush. After washing, you need to flush it with cold water. Be careful. If it is not clean, it must be disassembled. It will damage confidence.
The tool is hair dryer, brush, soap, dry the toilet paper after clean, and you have to swing the water manually. After finishing, the hair dryer is dry for about 12 minutes, and then the cold air cools down.
Prevent ''Electric shock ''So simply unplug the plug and insert a hair dryer